Fat tire electric bikes are among the most recent inventions in bicycle technology. The extra-wide tires (four inches or more) improve comfort and rollover ability, and the electric motor dramatically reduces the effort required to...
What you need when clean the bike?
Cleaning an electric bike doesn’t need to be a complicated process. Following is what you need:
●Clean rags- You will need quite a number of them for tasks involving grease, oil, and wax, as well as routine cleaning and drying.
●Disc brake cleaner - To properly wipe your brake disc of grease and dust.
●Chain lube - Properly lubricating your chain helps extend the life of your drivetrain. Always apply bicycle-specific lube oil to a clean chain.
●Poly-film - Used to cover your electrical components like the LCD digital display.
●A hose or a bucket of water: Water is often an effective aid when used correctly, but be cautious. Water, especially when flowing from a high-pressure hose, can cause harm to your bike's sensitive electrical component and bearing systems.
●Bike stand: This facilitates working on the bike at a comfortable height while you wash. It will also enable you to spin the pedals or remove the wheels, allowing you to clean all of the moving and difficult-to-reach parts.
●Soap or bike cleaner - You can improvise with a diluted dishwasher, or you buy a bike-specific washing liquid.
●Sponge and brushes - There are different sizes and shapes to reach hard-to-reach areas and remove filth that rinsing alone cannot. Old toothbrushes are ideal.
What you need to pay attention when cleaning your bike？
- When washing an E-bike, Remove the battery. pay attention to the electrical components.
- Turn off the E-bike before washing.
- Make sure the cap over the charger port is secured.
- Do not wash your E-bike upside down. The motor and battery are made to drain water while the bike is rolling. Flipping the bike upside down to wash it can cause water to pool in the motor and battery, causing damage.
- Do not use a power washer or high water pressure. The motor, battery, handlebar-mounted control, and display are water-resistant, but spraying these parts directly with high water pressure could cause damage. Similarly, you want to avoid spraying high-pressure water directly to any bearings and suspension.
- Avoid using any strong chemical cleaners. It’s best to use a bike-specific wash, as harsh chemicals could damage plastic parts (like the covers on your motor, battery, and the control unit).
- Always dry your E-bike fully before storing it. Residual water left sitting on electrical components could cause damage. Bounce the bike a few times on the ground to shake off excess water. Using a microfiber towel or other highly-absorbent cloth, wipe down the bicycle with special attention to bolts and electrical connections. After washing and drying your E-bike, remove the battery and ensure all connection ports are dry with a clean, dry microfiber towel.
- Never store your E-bike outdoors. Leaving your E-bike where it is exposed to the elements for prolonged periods could cause damage. Storing an E-bike in a damp garage or basement could also interfere with it drying completely. If you live in a wet/humid environment, consider storing your E-bike in a climate-controlled setting.
How Often Should You Clean Your Electric Bike?
You need to clean your electric bike periodically to extend its battery life and ensure it’s in good running condition. As mentioned, the cleaning frequency will depend on how much you use the e-bike, the type of terrain you drive, and the current season you’re in.
If you use it lightly, you can clean it once a month. The important thing is not to let your electric bike remain dirty for more than two months. This is because the battery compartment also gathers dust and other substances that interfere with the battery’s performance.
Taking care of your electric bike is crucial in being able to use it for a long time.